DITL_1000.txt
Items: (6 entries)
  0:
    Bounds: x1=128, y1=180, x2=288, y2=196
    Type: 5
    Info: 'Reset Bus at Startup'
  1:
    Bounds: x1=128, y1=160, x2=288, y2=176
    Type: 5
    Info: 'Old Driver Support'
  2:
    Bounds: x1=332, y1=0, x2=444, y2=290
    Type: 64
    Info: '  '
  3:
    Bounds: x1=128, y1=16, x2=300, y2=140
    Type: 0
    Info: ''
  4:
    Bounds: x1=232, y1=248, x2=312, y2=268
    Type: 4
    Info: 'Versions'
  5:
    Bounds: x1=124, y1=248, x2=204, y2=268
    Type: 4
    Info: 'Drivers'

DITL_155.txt
Items: (6 entries)
  0:
    Bounds: x1=340, y1=145, x2=410, y2=165
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=255, y1=145, x2=319, y2=165
    Type: 4
    Info: 'OK'
  2:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: ' '
  3:
    Bounds: x1=65, y1=10, x2=350, y2=50
    Type: -120
    Info: 'You have changed the initiator ID of this bus to a value greater than 7.'
  4:
    Bounds: x1=60, y1=55, x2=365, y2=80
    Type: -120
    Info: 'еее This choice can result in loss of data еее'
  5:
    Bounds: x1=30, y1=80, x2=410, y2=135
    Type: -120
    Info: 'Any ╘fast╒ but not wide devices will be inaccessible. You must also be sure that no other device uses the ID number selected or a collision will result.'

DITL_154.txt
Items: (6 entries)
  0:
    Bounds: x1=300, y1=130, x2=360, y2=150
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=220, y1=130, x2=284, y2=150
    Type: 4
    Info: 'OK'
  2:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: ' '
  3:
    Bounds: x1=65, y1=10, x2=350, y2=50
    Type: -120
    Info: 'You have changed the initiator ID of this bus to a value other than 7.'
  4:
    Bounds: x1=45, y1=55, x2=350, y2=80
    Type: -120
    Info: 'еее This choice can result in loss of data еее'
  5:
    Bounds: x1=30, y1=80, x2=355, y2=120
    Type: -120
    Info: 'You must be sure that no other device uses the ID number selected or a collision will result.'

DITL_153_Annunciator.txt
Items: (7 entries)
  0:
    Bounds: x1=100, y1=15, x2=500, y2=35
    Type: -120
    Info: ''
  1:
    Bounds: x1=100, y1=35, x2=500, y2=55
    Type: -120
    Info: ''
  2:
    Bounds: x1=100, y1=56, x2=500, y2=76
    Type: -120
    Info: ''
  3:
    Bounds: x1=100, y1=82, x2=500, y2=125
    Type: -120
    Info: ''
  4:
    Bounds: x1=10, y1=15, x2=70, y2=35
    Type: -120
    Info: 'Last:'
  5:
    Bounds: x1=10, y1=35, x2=70, y2=55
    Type: -120
    Info: 'Current:'
  6:
    Bounds: x1=10, y1=55, x2=70, y2=75
    Type: -120
    Info: 'Error:'

DITL_152_Termination Options Dual DF60 (2).txt
Items: (22 entries)
  0:
    Bounds: x1=435, y1=205, x2=503, y2=225
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=435, y1=170, x2=499, y2=190
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=85, y1=115, x2=215, y2=130
    Type: -120
    Info: 'Wide device detected'
  3:
    Bounds: x1=65, y1=100, x2=235, y2=115
    Type: -120
    Info: 'Internal Wide Connector (2)'
  4:
    Bounds: x1=16609, y1=100, x2=16754, y2=115
    Type: -120
    Info: 'Internal Fast Connector'
  5:
    Bounds: x1=150, y1=150, x2=286, y2=230
    Type: 64
    Info: ' '
  6:
    Bounds: x1=16609, y1=115, x2=16729, y2=130
    Type: -120
    Info: 'Fast device detected'
  7:
    Bounds: x1=20, y1=190, x2=145, y2=205
    Type: -120
    Info: 'Wide device detected'
  8:
    Bounds: x1=343, y1=175, x2=368, y2=205
    Type: -128
    Info: ''
  9:
    Bounds: x1=303, y1=175, x2=328, y2=205
    Type: 0
    Info: ''
  10:
    Bounds: x1=296, y1=160, x2=336, y2=175
    Type: -120
    Info: 'Upper'
  11:
    Bounds: x1=340, y1=160, x2=380, y2=175
    Type: -120
    Info: 'Lower'
  12:
    Bounds: x1=60, y1=240, x2=515, y2=330
    Type: -128
    Info: ''
  13:
    Bounds: x1=15, y1=240, x2=49, y2=272
    Type: -96
    Info: ' '
  14:
    Bounds: x1=390, y1=0, x2=529, y2=140
    Type: 64
    Info: ' '
  15:
    Bounds: x1=10, y1=175, x2=150, y2=190
    Type: -120
    Info: 'External Connector (2)'
  16:
    Bounds: x1=45, y1=25, x2=360, y2=80
    Type: -120
    Info: 'The PCI JackHammerк Dual Ultra Diff uses cable sensing to provide correct automatic termination for most situations. Select the appropriate connections below to customize termination.'
  17:
    Bounds: x1=80, y1=205, x2=140, y2=221
    Type: 7
    Info: ' Б'
  18:
    Bounds: x1=150, y1=130, x2=210, y2=146
    Type: 7
    Info: ' В'
  19:
    Bounds: x1=16609, y1=130, x2=16669, y2=146
    Type: 7
    Info: ' Г'
  20:
    Bounds: x1=16444, y1=220, x2=16794, y2=235
    Type: 7
    Info: ' Й'
  21:
    Bounds: x1=300, y1=205, x2=380, y2=220
    Type: -120
    Info: 'Termination'

DITL_151_Termination Options UMax.txt
Items: (22 entries)
  0:
    Bounds: x1=435, y1=205, x2=503, y2=225
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=435, y1=170, x2=499, y2=190
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=90, y1=85, x2=220, y2=100
    Type: -120
    Info: 'Wide device detected'
  3:
    Bounds: x1=70, y1=70, x2=215, y2=85
    Type: -120
    Info: 'Internal Wide Connector'
  4:
    Bounds: x1=16614, y1=95, x2=16759, y2=110
    Type: -120
    Info: 'Internal Fast Connector'
  5:
    Bounds: x1=150, y1=130, x2=286, y2=210
    Type: 64
    Info: ' 	'
  6:
    Bounds: x1=16614, y1=110, x2=16734, y2=125
    Type: -120
    Info: 'Fast device detected'
  7:
    Bounds: x1=25, y1=155, x2=150, y2=170
    Type: -120
    Info: 'Wide device detected'
  8:
    Bounds: x1=343, y1=155, x2=368, y2=185
    Type: -128
    Info: ''
  9:
    Bounds: x1=303, y1=155, x2=328, y2=185
    Type: 0
    Info: ''
  10:
    Bounds: x1=296, y1=140, x2=336, y2=155
    Type: -120
    Info: 'Upper'
  11:
    Bounds: x1=340, y1=140, x2=380, y2=155
    Type: -120
    Info: 'Lower'
  12:
    Bounds: x1=60, y1=240, x2=515, y2=330
    Type: -128
    Info: ''
  13:
    Bounds: x1=15, y1=240, x2=49, y2=272
    Type: -96
    Info: ' '
  14:
    Bounds: x1=390, y1=0, x2=529, y2=140
    Type: 64
    Info: ' '
  15:
    Bounds: x1=35, y1=140, x2=155, y2=155
    Type: -120
    Info: 'External Connector'
  16:
    Bounds: x1=45, y1=5, x2=360, y2=60
    Type: -120
    Info: 'The SuperMac 2000Sxy uses cable sensing to provide correct automatic termination for most situations. Select the appropriate connections below to customize termination.'
  17:
    Bounds: x1=85, y1=170, x2=145, y2=186
    Type: 7
    Info: ' Б'
  18:
    Bounds: x1=150, y1=100, x2=210, y2=116
    Type: 7
    Info: ' В'
  19:
    Bounds: x1=16614, y1=125, x2=16674, y2=141
    Type: 7
    Info: ' Г'
  20:
    Bounds: x1=60, y1=220, x2=410, y2=235
    Type: 7
    Info: ' Й'
  21:
    Bounds: x1=300, y1=185, x2=380, y2=200
    Type: -120
    Info: 'Termination'

DITL_150_Termination Options UMax.txt
Items: (22 entries)
  0:
    Bounds: x1=435, y1=205, x2=503, y2=225
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=435, y1=170, x2=499, y2=190
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=90, y1=85, x2=220, y2=100
    Type: -120
    Info: 'Wide device detected'
  3:
    Bounds: x1=70, y1=70, x2=215, y2=85
    Type: -120
    Info: 'Internal Wide Connector'
  4:
    Bounds: x1=16614, y1=95, x2=16759, y2=110
    Type: -120
    Info: 'Internal Fast Connector'
  5:
    Bounds: x1=150, y1=130, x2=286, y2=210
    Type: 64
    Info: ' 	'
  6:
    Bounds: x1=16614, y1=110, x2=16734, y2=125
    Type: -120
    Info: 'Fast device detected'
  7:
    Bounds: x1=25, y1=155, x2=150, y2=170
    Type: -120
    Info: 'Wide device detected'
  8:
    Bounds: x1=343, y1=155, x2=368, y2=185
    Type: -128
    Info: ''
  9:
    Bounds: x1=303, y1=155, x2=328, y2=185
    Type: 0
    Info: ''
  10:
    Bounds: x1=296, y1=140, x2=336, y2=155
    Type: -120
    Info: 'Upper'
  11:
    Bounds: x1=340, y1=140, x2=380, y2=155
    Type: -120
    Info: 'Lower'
  12:
    Bounds: x1=60, y1=240, x2=515, y2=330
    Type: -128
    Info: ''
  13:
    Bounds: x1=15, y1=240, x2=49, y2=272
    Type: -96
    Info: ' '
  14:
    Bounds: x1=390, y1=0, x2=529, y2=140
    Type: 64
    Info: ' '
  15:
    Bounds: x1=35, y1=140, x2=155, y2=155
    Type: -120
    Info: 'External Connector'
  16:
    Bounds: x1=45, y1=5, x2=360, y2=60
    Type: -120
    Info: 'The SuperMac E100 uses cable sensing to provide correct automatic termination for most situations. Select the appropriate connections below to customize termination.'
  17:
    Bounds: x1=85, y1=170, x2=145, y2=186
    Type: 7
    Info: ' Б'
  18:
    Bounds: x1=150, y1=100, x2=210, y2=116
    Type: 7
    Info: ' В'
  19:
    Bounds: x1=16614, y1=125, x2=16674, y2=141
    Type: 7
    Info: ' Г'
  20:
    Bounds: x1=60, y1=220, x2=410, y2=235
    Type: 7
    Info: ' Й'
  21:
    Bounds: x1=300, y1=185, x2=380, y2=200
    Type: -120
    Info: 'Termination'

DITL_149.txt
Items: (4 entries)
  0:
    Bounds: x1=315, y1=155, x2=383, y2=175
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: '  '
  2:
    Bounds: x1=65, y1=10, x2=390, y2=100
    Type: -120
    Info: 'The JackHammerк in PCI slot ^1, which uses a Differential interface, was correctly connected at startup, but now appears to have a Single-Ended (traditional) SCSI device connected to it.'
  3:
    Bounds: x1=65, y1=100, x2=390, y2=135
    Type: -120
    Info: 'No operation is possible until this problem is corrected.'

DITL_148.txt
Items: (3 entries)
  0:
    Bounds: x1=315, y1=120, x2=383, y2=140
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: ' '
  2:
    Bounds: x1=65, y1=10, x2=390, y2=100
    Type: -120
    Info: 'The JackHammerк in PCI slot ^1, which uses a Differential interface, was disabled at startup because it appeared to have a Single-Ended (traditional) SCSI device connected to it.This problem has since been corrected.'

DITL_147.txt
Items: (3 entries)
  0:
    Bounds: x1=315, y1=120, x2=383, y2=140
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: '  '
  2:
    Bounds: x1=65, y1=10, x2=390, y2=105
    Type: -120
    Info: 'The JackHammerк in PCI slot ^1, which uses a Differential interface, has been disabled because it appears to have a Single-Ended (traditional) SCSI device connected to it.No operation is possible until this problem is corrected.'

DITL_146_Termination Options Dual DF60 (1).txt
Items: (22 entries)
  0:
    Bounds: x1=435, y1=205, x2=503, y2=225
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=435, y1=170, x2=499, y2=190
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=160, y1=115, x2=290, y2=130
    Type: -120
    Info: 'Wide device detected'
  3:
    Bounds: x1=115, y1=100, x2=290, y2=115
    Type: -120
    Info: 'Internal Wide Connector (1)'
  4:
    Bounds: x1=16609, y1=100, x2=16754, y2=115
    Type: -120
    Info: 'Internal Fast Connector'
  5:
    Bounds: x1=150, y1=150, x2=286, y2=230
    Type: 64
    Info: ' 
'
  6:
    Bounds: x1=16609, y1=115, x2=16729, y2=130
    Type: -120
    Info: 'Fast device detected'
  7:
    Bounds: x1=25, y1=150, x2=150, y2=165
    Type: -120
    Info: 'Wide device detected'
  8:
    Bounds: x1=343, y1=175, x2=368, y2=205
    Type: -128
    Info: ''
  9:
    Bounds: x1=303, y1=175, x2=328, y2=205
    Type: 0
    Info: ''
  10:
    Bounds: x1=296, y1=160, x2=336, y2=175
    Type: -120
    Info: 'Upper'
  11:
    Bounds: x1=340, y1=160, x2=380, y2=175
    Type: -120
    Info: 'Lower'
  12:
    Bounds: x1=60, y1=240, x2=515, y2=330
    Type: -128
    Info: ''
  13:
    Bounds: x1=15, y1=240, x2=49, y2=272
    Type: -96
    Info: ' '
  14:
    Bounds: x1=390, y1=0, x2=529, y2=140
    Type: 64
    Info: ' '
  15:
    Bounds: x1=20, y1=135, x2=160, y2=150
    Type: -120
    Info: 'External Connector (1)'
  16:
    Bounds: x1=45, y1=25, x2=360, y2=80
    Type: -120
    Info: 'The PCI JackHammerк Dual Ultra Diff uses cable sensing to provide correct automatic termination for most situations. Select the appropriate connections below to customize termination.'
  17:
    Bounds: x1=85, y1=165, x2=145, y2=181
    Type: 7
    Info: ' Б'
  18:
    Bounds: x1=225, y1=130, x2=285, y2=146
    Type: 7
    Info: ' В'
  19:
    Bounds: x1=16609, y1=130, x2=16669, y2=146
    Type: 7
    Info: ' Г'
  20:
    Bounds: x1=16444, y1=220, x2=16794, y2=235
    Type: 7
    Info: ' Й'
  21:
    Bounds: x1=300, y1=205, x2=380, y2=220
    Type: -120
    Info: 'Termination'

DITL_145_Termination Options DF60.txt
Items: (22 entries)
  0:
    Bounds: x1=435, y1=205, x2=503, y2=225
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=435, y1=170, x2=499, y2=190
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=85, y1=115, x2=215, y2=130
    Type: -120
    Info: 'Wide device detected'
  3:
    Bounds: x1=65, y1=100, x2=210, y2=115
    Type: -120
    Info: 'Internal Wide Connector'
  4:
    Bounds: x1=16609, y1=100, x2=16754, y2=115
    Type: -120
    Info: 'Internal Fast Connector'
  5:
    Bounds: x1=150, y1=150, x2=286, y2=230
    Type: 64
    Info: ' '
  6:
    Bounds: x1=16609, y1=115, x2=16729, y2=130
    Type: -120
    Info: 'Fast device detected'
  7:
    Bounds: x1=25, y1=175, x2=150, y2=190
    Type: -120
    Info: 'Wide device detected'
  8:
    Bounds: x1=16727, y1=175, x2=16752, y2=205
    Type: -128
    Info: ''
  9:
    Bounds: x1=303, y1=175, x2=370, y2=205
    Type: 0
    Info: ''
  10:
    Bounds: x1=301, y1=160, x2=375, y2=175
    Type: -120
    Info: 'Differential'
  11:
    Bounds: x1=16724, y1=160, x2=16764, y2=175
    Type: -120
    Info: 'Lower'
  12:
    Bounds: x1=60, y1=240, x2=515, y2=330
    Type: -128
    Info: ''
  13:
    Bounds: x1=15, y1=240, x2=49, y2=272
    Type: -96
    Info: ' '
  14:
    Bounds: x1=390, y1=0, x2=529, y2=140
    Type: 64
    Info: ' '
  15:
    Bounds: x1=35, y1=160, x2=155, y2=175
    Type: -120
    Info: 'External Connector'
  16:
    Bounds: x1=45, y1=25, x2=360, y2=80
    Type: -120
    Info: 'The PCI JackHammerк Ultra Diff uses cable sensing to provide correct automatic termination for most situations. Select the appropriate connections below to customize termination.'
  17:
    Bounds: x1=85, y1=190, x2=145, y2=206
    Type: 7
    Info: ' З'
  18:
    Bounds: x1=150, y1=130, x2=210, y2=146
    Type: 7
    Info: ' И'
  19:
    Bounds: x1=16609, y1=130, x2=16669, y2=146
    Type: 7
    Info: ' Г'
  20:
    Bounds: x1=16444, y1=220, x2=16794, y2=235
    Type: 7
    Info: ' Й'
  21:
    Bounds: x1=300, y1=205, x2=380, y2=220
    Type: -120
    Info: 'Termination'

DITL_144_Test Window.txt
Items: (8 entries)
  0:
    Bounds: x1=310, y1=245, x2=374, y2=265
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=10, y1=10, x2=320, y2=55
    Type: -120
    Info: 'Since the JackHammerк PCI Card in slot ^1 was not active, it is being tested to insure functionality.The test can be canceled by clicking the button.'
  2:
    Bounds: x1=15, y1=65, x2=195, y2=80
    Type: -120
    Info: 'Last Test Completed:'
  3:
    Bounds: x1=15, y1=125, x2=110, y2=140
    Type: -120
    Info: 'Current Test:'
  4:
    Bounds: x1=15, y1=190, x2=70, y2=205
    Type: -120
    Info: 'Status:'
  5:
    Bounds: x1=70, y1=80, x2=315, y2=125
    Type: -120
    Info: 'No previous test'
  6:
    Bounds: x1=70, y1=140, x2=315, y2=185
    Type: -120
    Info: 'No test active'
  7:
    Bounds: x1=30, y1=205, x2=280, y2=260
    Type: -120
    Info: ''

DITL_143_More than two cables.txt
Items: (4 entries)
  0:
    Bounds: x1=315, y1=115, x2=383, y2=135
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: ' '
  2:
    Bounds: x1=65, y1=10, x2=390, y2=80
    Type: -120
    Info: 'The JackHammerк in PCI slot ^1 appeared to have more than two cables connected to it due to Custom Termination settings.Automatic Termination mode has been set.'
  3:
    Bounds: x1=65, y1=85, x2=395, y2=110
    Type: -120
    Info: 'You may want to update the custom settings.'

DITL_142_Disable - more than two cables.txt
Items: (4 entries)
  0:
    Bounds: x1=315, y1=130, x2=383, y2=150
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: ' '
  2:
    Bounds: x1=65, y1=10, x2=390, y2=100
    Type: -120
    Info: 'The JackHammerк in PCI slot ^1 was disabled to avoid loss of data because more than two cables appeared to be connected to it at startup due to Custom Termination settings.Automatic Termination mode has been set.'
  3:
    Bounds: x1=65, y1=100, x2=395, y2=125
    Type: -120
    Info: 'Restart the computer to use this JackHammerк.'

DITL_141.txt
Items: (4 entries)
  0:
    Bounds: x1=315, y1=150, x2=383, y2=170
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: '  '
  2:
    Bounds: x1=65, y1=10, x2=390, y2=80
    Type: -120
    Info: 'The JackHammerк in PCI slot ^1 now has more that two cables connected to it.This makes it impossible to correctly terminate the SCSI bus.'
  3:
    Bounds: x1=65, y1=80, x2=385, y2=135
    Type: -120
    Info: '       еее Loss of Data is Likely еееShut down the computer, remove the extra cable, then restart to use this JackHammerк.'

DITL_140.txt
Items: (4 entries)
  0:
    Bounds: x1=315, y1=120, x2=383, y2=140
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: '  '
  2:
    Bounds: x1=65, y1=10, x2=390, y2=80
    Type: -120
    Info: 'The JackHammerк in PCI slot ^1 was disabled to avoid loss of data because more than two cables were connected to it at startup.This problem has since been corrected.'
  3:
    Bounds: x1=65, y1=85, x2=395, y2=110
    Type: -120
    Info: 'Restart the computer to use this JackHammerк.'

DITL_139.txt
Items: (3 entries)
  0:
    Bounds: x1=305, y1=125, x2=373, y2=145
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: ' '
  2:
    Bounds: x1=70, y1=15, x2=370, y2=120
    Type: -120
    Info: 'The JackHammerк in PCI slot ^1 has been configured to use non-standard termination.To change to automatic termination, select the Automatic option from the Termination popup menu.'

DITL_138.txt
Items: (4 entries)
  0:
    Bounds: x1=315, y1=165, x2=383, y2=185
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: '  '
  2:
    Bounds: x1=65, y1=10, x2=390, y2=95
    Type: -120
    Info: 'The JackHammerк in PCI slot ^1 has been disabled to avoid loss of data because more than two cables are connected to it.This makes it impossible to correctly terminate the SCSI bus.'
  3:
    Bounds: x1=65, y1=105, x2=385, y2=145
    Type: -120
    Info: 'Shut down the computer, remove the extra cable, then restart to use this JackHammerк.'

DITL_137.txt
Items: (6 entries)
  0:
    Bounds: x1=290, y1=130, x2=368, y2=150
    Type: 4
    Info: 'Automatic'
  1:
    Bounds: x1=210, y1=130, x2=274, y2=150
    Type: 4
    Info: 'Forced'
  2:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: ' '
  3:
    Bounds: x1=65, y1=10, x2=350, y2=50
    Type: -120
    Info: 'You have changed your termination settings to disable Automatic Termination.'
  4:
    Bounds: x1=45, y1=55, x2=350, y2=80
    Type: -120
    Info: 'еее This choice can result in loss of data еее'
  5:
    Bounds: x1=30, y1=80, x2=355, y2=120
    Type: -120
    Info: 'The JackHammerк will be disabled at startup if an illegal cable configuration is detected.'

DITL_136.txt
Items: (3 entries)
  0:
    Bounds: x1=292, y1=76, x2=360, y2=96
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: ' '
  2:
    Bounds: x1=65, y1=10, x2=350, y2=50
    Type: -120
    Info: 'You have changed your termination settings to select Automatic Termination.'

DITL_135_Termination Options SE40.txt
Items: (22 entries)
  0:
    Bounds: x1=435, y1=205, x2=503, y2=225
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=435, y1=170, x2=499, y2=190
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=85, y1=115, x2=215, y2=130
    Type: -120
    Info: 'Wide device detected'
  3:
    Bounds: x1=65, y1=100, x2=210, y2=115
    Type: -120
    Info: 'Internal Wide Connector'
  4:
    Bounds: x1=225, y1=100, x2=370, y2=115
    Type: -120
    Info: 'Internal Fast Connector'
  5:
    Bounds: x1=150, y1=150, x2=286, y2=230
    Type: 64
    Info: ' '
  6:
    Bounds: x1=225, y1=115, x2=345, y2=130
    Type: -120
    Info: 'Fast device detected'
  7:
    Bounds: x1=25, y1=175, x2=150, y2=190
    Type: -120
    Info: 'Wide device detected'
  8:
    Bounds: x1=343, y1=175, x2=368, y2=205
    Type: -128
    Info: ''
  9:
    Bounds: x1=303, y1=175, x2=328, y2=205
    Type: 0
    Info: ''
  10:
    Bounds: x1=296, y1=160, x2=336, y2=175
    Type: -120
    Info: 'Upper'
  11:
    Bounds: x1=340, y1=160, x2=380, y2=175
    Type: -120
    Info: 'Lower'
  12:
    Bounds: x1=60, y1=240, x2=515, y2=330
    Type: -128
    Info: ''
  13:
    Bounds: x1=15, y1=240, x2=49, y2=272
    Type: -96
    Info: ' '
  14:
    Bounds: x1=390, y1=0, x2=529, y2=140
    Type: 64
    Info: ' '
  15:
    Bounds: x1=35, y1=160, x2=155, y2=175
    Type: -120
    Info: 'External Connector'
  16:
    Bounds: x1=45, y1=25, x2=360, y2=80
    Type: -120
    Info: 'The PCI JackHammerк uses cable sensing to provide correct automatic termination for most situations. Select the appropriate connections below to customize termination.'
  17:
    Bounds: x1=85, y1=190, x2=145, y2=206
    Type: 7
    Info: ' Б'
  18:
    Bounds: x1=150, y1=130, x2=210, y2=146
    Type: 7
    Info: ' В'
  19:
    Bounds: x1=225, y1=130, x2=285, y2=146
    Type: 7
    Info: ' Г'
  20:
    Bounds: x1=16444, y1=220, x2=16794, y2=235
    Type: 7
    Info: ' Й'
  21:
    Bounds: x1=300, y1=205, x2=380, y2=220
    Type: -120
    Info: 'Termination'

DITL_134_Update takes effect after restart.txt
Items: (3 entries)
  0:
    Bounds: x1=292, y1=76, x2=360, y2=96
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=65, y1=15, x2=280, y2=70
    Type: -120
    Info: 'Updates to the JackHammerк ROM and settings will take effect at the next restart.'
  2:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: ' '

DITL_133.txt
Items: (1 entries)
  0:
    Bounds: x1=0, y1=0, x2=270, y2=244
    Type: 64
    Info: ' '

DITL_132.txt
Items: (4 entries)
  0:
    Bounds: x1=292, y1=76, x2=360, y2=96
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=212, y1=76, x2=276, y2=96
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=65, y1=15, x2=340, y2=65
    Type: -120
    Info: 'Use available files to make this control panel stand alone?'
  3:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: ' '

DITL_131.txt
Items: (3 entries)
  0:
    Bounds: x1=292, y1=105, x2=360, y2=125
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=65, y1=15, x2=345, y2=90
    Type: -120
    Info: 'The PCI JackHammer in slot ^1 has different software versions than this control panel. But the versions necessary to update it are not present.'
  2:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: '  '

DITL_130.txt
Items: (4 entries)
  0:
    Bounds: x1=292, y1=100, x2=360, y2=120
    Type: 4
    Info: 'Update'
  1:
    Bounds: x1=212, y1=100, x2=276, y2=120
    Type: 4
    Info: 'Skip'
  2:
    Bounds: x1=65, y1=15, x2=350, y2=85
    Type: 8
    Info: 'The PCI JackHammer in slot ^1 has different software versions than this control panel.Update it?'
  3:
    Bounds: x1=20, y1=10, x2=52, y2=42
    Type: -96
    Info: ' '

DITL_129.txt
Items: (44 entries)
  0:
    Bounds: x1=280, y1=292, x2=348, y2=312
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=200, y1=292, x2=264, y2=312
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=30, y1=100, x2=190, y2=116
    Type: 5
    Info: 'Simple Volumes'
  3:
    Bounds: x1=30, y1=132, x2=190, y2=148
    Type: 5
    Info: 'Array Volumes'
  4:
    Bounds: x1=30, y1=164, x2=190, y2=180
    Type: 5
    Info: 'Removable Volumes'
  5:
    Bounds: x1=20, y1=200, x2=136, y2=216
    Type: 6
    Info: 'All Device IDs'
  6:
    Bounds: x1=20, y1=216, x2=136, y2=232
    Type: 6
    Info: 'No Device IDs'
  7:
    Bounds: x1=20, y1=232, x2=144, y2=248
    Type: 6
    Info: 'Only Device IDs'
  8:
    Bounds: x1=20, y1=261, x2=40, y2=281
    Type: 5
    Info: ''
  9:
    Bounds: x1=40, y1=261, x2=60, y2=281
    Type: 5
    Info: ''
  10:
    Bounds: x1=60, y1=261, x2=80, y2=281
    Type: 5
    Info: ''
  11:
    Bounds: x1=80, y1=261, x2=100, y2=281
    Type: 5
    Info: ''
  12:
    Bounds: x1=100, y1=261, x2=120, y2=281
    Type: 5
    Info: ''
  13:
    Bounds: x1=120, y1=261, x2=140, y2=281
    Type: 5
    Info: ''
  14:
    Bounds: x1=140, y1=261, x2=160, y2=281
    Type: 5
    Info: ''
  15:
    Bounds: x1=160, y1=261, x2=180, y2=281
    Type: 5
    Info: ''
  16:
    Bounds: x1=180, y1=261, x2=200, y2=281
    Type: 5
    Info: ''
  17:
    Bounds: x1=200, y1=261, x2=220, y2=281
    Type: 5
    Info: ''
  18:
    Bounds: x1=220, y1=261, x2=240, y2=281
    Type: 5
    Info: ''
  19:
    Bounds: x1=240, y1=261, x2=260, y2=281
    Type: 5
    Info: ''
  20:
    Bounds: x1=260, y1=261, x2=280, y2=281
    Type: 5
    Info: ''
  21:
    Bounds: x1=280, y1=261, x2=300, y2=281
    Type: 5
    Info: ''
  22:
    Bounds: x1=300, y1=261, x2=320, y2=281
    Type: 5
    Info: ''
  23:
    Bounds: x1=320, y1=261, x2=340, y2=281
    Type: 5
    Info: ''
  24:
    Bounds: x1=21, y1=250, x2=35, y2=265
    Type: -120
    Info: '0'
  25:
    Bounds: x1=41, y1=250, x2=55, y2=265
    Type: -120
    Info: '1'
  26:
    Bounds: x1=61, y1=250, x2=75, y2=265
    Type: -120
    Info: '2'
  27:
    Bounds: x1=81, y1=250, x2=95, y2=265
    Type: -120
    Info: '3'
  28:
    Bounds: x1=101, y1=250, x2=115, y2=265
    Type: -120
    Info: '4'
  29:
    Bounds: x1=121, y1=250, x2=135, y2=265
    Type: -120
    Info: '5'
  30:
    Bounds: x1=141, y1=250, x2=155, y2=265
    Type: -120
    Info: '6'
  31:
    Bounds: x1=161, y1=250, x2=175, y2=265
    Type: -120
    Info: '7'
  32:
    Bounds: x1=181, y1=250, x2=195, y2=265
    Type: -120
    Info: '8'
  33:
    Bounds: x1=201, y1=250, x2=215, y2=265
    Type: -120
    Info: '9'
  34:
    Bounds: x1=221, y1=250, x2=240, y2=265
    Type: -120
    Info: '10'
  35:
    Bounds: x1=241, y1=250, x2=260, y2=265
    Type: -120
    Info: '11'
  36:
    Bounds: x1=261, y1=250, x2=280, y2=265
    Type: -120
    Info: '12'
  37:
    Bounds: x1=281, y1=250, x2=300, y2=265
    Type: -120
    Info: '13'
  38:
    Bounds: x1=301, y1=250, x2=320, y2=265
    Type: -120
    Info: '14'
  39:
    Bounds: x1=321, y1=250, x2=340, y2=265
    Type: -120
    Info: '15'
  40:
    Bounds: x1=192, y1=101, x2=352, y2=191
    Type: -120
    Info: 'You can have the PCI JackHammerк load special drivers Accelerated for Power Macintosh for some types of devices connected to the card in slot ^1.'
  41:
    Bounds: x1=150, y1=200, x2=360, y2=250
    Type: -120
    Info: 'You can enable loading of drivers for all device IDs, no device IDs or individual device IDs.'
  42:
    Bounds: x1=10, y1=10, x2=205, y2=90
    Type: 64
    Info: ' '
  43:
    Bounds: x1=0, y1=0, x2=0, y2=0
    Type: -127
    Info: '  Б'

DITL_128.txt
Items: (10 entries)
  0:
    Bounds: x1=394, y1=204, x2=462, y2=224
    Type: 4
    Info: 'Done'
  1:
    Bounds: x1=16, y1=108, x2=364, y2=224
    Type: 0
    Info: ''
  2:
    Bounds: x1=16, y1=88, x2=88, y2=104
    Type: -120
    Info: 'Component'
  3:
    Bounds: x1=212, y1=88, x2=268, y2=104
    Type: -120
    Info: 'Version'
  4:
    Bounds: x1=300, y1=76, x2=340, y2=104
    Type: -120
    Info: 'Up to Date'
  5:
    Bounds: x1=388, y1=32, x2=468, y2=52
    Type: 4
    Info: 'Update'
  6:
    Bounds: x1=388, y1=64, x2=468, y2=84
    Type: 4
    Info: 'Update All'
  7:
    Bounds: x1=384, y1=96, x2=468, y2=188
    Type: -120
    Info: 'Versions of Components Stored in the ROM of the slot ^1 PCI JackHammer'
  8:
    Bounds: x1=32, y1=8, x2=284, y2=80
    Type: 64
    Info: ' '
  9:
    Bounds: x1=0, y1=0, x2=0, y2=0
    Type: -127
    Info: '  А'

DITL_-4064.txt
Items: (16 entries)
  0:
    Bounds: x1=161, y1=102, x2=321, y2=118
    Type: 7
    Info: ' Ж'
  1:
    Bounds: x1=161, y1=133, x2=321, y2=149
    Type: 7
    Info: ' Е'
  2:
    Bounds: x1=412, y1=176, x2=436, y2=200
    Type: 0
    Info: ''
  3:
    Bounds: x1=488, y1=176, x2=512, y2=200
    Type: 0
    Info: ''
  4:
    Bounds: x1=108, y1=16, x2=378, y2=95
    Type: 0
    Info: ''
  5:
    Bounds: x1=161, y1=164, x2=321, y2=180
    Type: 7
    Info: ' Д'
  6:
    Bounds: x1=392, y1=0, x2=531, y2=284
    Type: 64
    Info: '  '
  7:
    Bounds: x1=264, y1=236, x2=379, y2=270
    Type: 64
    Info: ' '
  8:
    Bounds: x1=103, y1=236, x2=228, y2=268
    Type: 64
    Info: ' '
  9:
    Bounds: x1=125, y1=94, x2=157, y2=126
    Type: -128
    Info: ''
  10:
    Bounds: x1=125, y1=125, x2=157, y2=157
    Type: -128
    Info: ''
  11:
    Bounds: x1=125, y1=156, x2=157, y2=188
    Type: 0
    Info: ''
  12:
    Bounds: x1=130, y1=201, x2=250, y2=225
    Type: 7
    Info: ' А'
  13:
    Bounds: x1=275, y1=201, x2=340, y2=225
    Type: 7
    Info: ' Л'
  14:
    Bounds: x1=120, y1=189, x2=215, y2=204
    Type: -120
    Info: 'Termination:'
  15:
    Bounds: x1=267, y1=189, x2=362, y2=204
    Type: -120
    Info: 'Initiator ID:'